1. Declaration of Incorporation
28
1.1 Declaration of Incorporation
As set out in Machinery Directive 2006/42/EC, Annex II, 1.B for partly completed machinery
The manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
32423 Minden, Germany
confirms that the named product
Mat:
see rating plate label on the front page of these assembly instructions
AB:
see rating plate label on the front page of these assembly instructions
Pos:
see rating plate label on the front page of these assembly instructions
SN:
see rating plate label on the front page of these assembly instructions
ID No.:
see rating plate label on the front page of these assembly instructions
Bj:
see rating plate label on the front page of these assembly instructions
complies with the requirements for partly completed machinery in accordance with EC Machinery
Directive 2006/42/EG.
The following basic requirements of Machinery Directive 2006/42/EC as set forth in Appendix I
are applied and fulfilled:
1.1.5.; 1.1.7.; 1.3.; 1.3.2.; 1.3.3.; 1.3.4.; 1.3.7.; 1.3.9.; 1.5.8.; 3.2.1.; 3.4.4.; 4.1.2.1.; 4.1.2.3.;
4.1.2.4.; 4.1.2.5.; 4.1.2.6.a), 4.1.2.6.b); 4.1.2.6.c); 4.1.2.6.d); 4.1.2.6.e); 4.1.3.; 4.2.1.; 4.2.1.4.;
4.2.2.; 4.2.3.; 4.3.1.; 4.3.2.; 4.3.3.; 4.4.1.; 4.4.2.; 6.1.1.; 6.3.3.; 6.4.1.; 6.4.3.
The following harmonised standards were applied:
DIN EN ISO 12100 – 1
Machine safety - Basic definitions, general design guidelines Part 1: Basic
terminology, system engineering
DIN EN ISO 12100 – 2
Machine safety - Basic definitions, general design guidelines Part 2: Tech-
nical guidelines and specifications
DIN EN ISO 14121 – 1
Machine safety – Risk assessment – Part 1 Guidelines
RK Rose+Krieger undertakes to supply the technical documents for partly completed machinery
as set out in Annex VII B of Directive 2006/42/EC in electronic form to the national agencies in re-
sponse to a justified request.
Under the responsibility of the documentation officer
Minden / 1st March 2011
Technical Director
Location / Date
Signature
Signatory’s position
Putting into service is forbidden until the machine in which this partly completed machinery is in-
corporated complies with the provisions of EC Directive 2006/42/EC.
Before bringing onto the market, this must comply with the CE Directives, including documenta-
tion.
Minden / 1st March 2011
CEO
Location/Date
Signature
Signatory’s position