RJG Lynx OR2-M, Руководство по эксплуатации продукта

Страница: 11 / 34

Product Manual | Lynx™ Shielded Dual‑Relay Output Module OR2‑M
RJG, Inc. 3
PRODUCTION OUTPUTS
The OR2‑M can be used to provide a signal
to a light indicator tree that displays the status
of a running molding machine from the
eDART
software to indicate the status of a process.
The shielded dual‑relay input module cable
C‑OR2‑M‑3M is wired to the light indicator tree
which accepts the signal; the C‑OR2‑M‑3M is
connected to the OR2‑M, which collects the
signal for use from the
eDART .
1.
Job Down
The job down production output sends a signal
to a light indicator for display.
2.
Job Running
The job running production output sends a
signal to a light indicator for display.
3.
Job Started
The job started production output sends a signal
to a light indicator for display.
INDICATOR OUTPUTS
The OR2‑M can be used to provide a signal
to a light indicator tree that displays the status
of a running molding machine from the
eDART
software to indicate if a process is running
within its preset limits. The shielded dual‑relay
input module cable C‑OR2‑M‑3M is wired to
the light indicator tree which accepts the signal;
the C‑OR2‑M‑3M is connected to the OR2‑M,
which collects the signal for use from the
eDART .
1.
Process Good
The process good indicator output sends a
signal to a light indicator for display.
2.
Process Alarm
The process alarm indicator output sends a
signal to a light indicator for display.
3.
Process Warning
The process warning indicator output sends a
signal to a light indicator for display.
SEQUENCE MODULE OUTPUTS
The OR2‑D can be used to provide a signal to
a robot, PLC, etc. that indicates the current
status of the molding machine cycle’s sequence,
including the statuses listed below:
•
Injection Forward
•
Screw Run
•
Mold Opening
•
Mold Closing
•
Machine in Manual
•
Pump On
•
Mold Clamped
•
Mold Fully open
•
First Stage
•
Second Stage
•
Fill
•
Shuttle Position
•
Core Pull
•
Pin Pull
•
Ejection
•
Unknown
•
Auxiliary
OPERATION ( continued )