03-TM-0046 Page 8 of 13
FIGURE 3. BEACON EXPLODED VIEW SHOWING
RELATIVE LOCATION OF BATTERY AND RELATED
PARTS
CAUTION
DIRT, LINT, SAND AND OTHER FOREIGN SUB-
STANCES IN LUBRICANT ON SEALING SURFACES
MAY ALLOW WATER LEAKAGE THROUGH THE O-
RING SEAL. SCRATCHES OR GOUGES WILL ALSO
CAUSE WATER LEAKAGE.
2.5.5. Check O-ring for ware or damage. If it is necessary to replace
O-ring. remove the old O-ring from the battery end cap. Do not use
steel screwdriver or sharp tool because of danger to damaging O-ring
groove . Clean O-ring groove in the body and the threads on the cover
by wiping them thoroughly with mild soap and water.
2.5.6. Carefully install new O-ring on battery end cap. Apply a thin
coating of O-ring lubricant to O-ring and O-ring groove.
