11
GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2.
Layout (Fig. 1)
1. Battery insertion bay
2. Contacts
3.
Ventilation slots
4. LED (battery level/error messages)
5. Mains cable
3.
Scope of delivery
1 Charger
1 Instruction manual
4.
Scope of delivery
•
Open the packaging and remove the device care
-
fully.
•
Remove the packaging material as well as the
packaging and transport bracing (if available).
•
Check that the delivery is complete.
•
Check the device and accessory parts for trans
-
port damage.
•
If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas
-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
5.
Safety information
m
WARNING! Read all safety warnings, instruc
-
tions, illustrations and technical data provided
with this power tool.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future refer
-
ence.
The term “power tool” used in the safety instructions
refers to mains powered power tools (with power
cord) and cordless power tools (without power cord).
Read these instructions before using the charger and
follow them:
•
operating instructions provided,
•
rules and regulations for accident prevention ap
-
plicable to the operating site.
This charger is not designed for use by children and
people with limited physical, sensory or mental abili
-
ties or a lack of experience and knowledge.
1.
Introduction
MANUFACTURER:
GARLAND distributor, s.r.o.
Hradecká 1136, 506 01 Jičín
Czech Republic
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified,
•
A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu
-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in
-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat
-
ing instructions contain important information on how
to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, re
-
duce downtimes and how to increase reliability and
service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula
-
tions that apply for the operation of the machine in
your country. Keep the operating instructions pack
-
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture.
Read the instruction manual each time before op
-
erating the machine and carefully follow its informa
-
tion. The machine can only be operated by persons
who were instructed concerning the operation of the
machine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
In addition to the safety notices contained in this
operating manual and the particular instructions for
your country, the generally recognised technical reg
-
ulations for the operation of identical devices must
be complied with.
Содержание RAC 220
Страница 2: ...2 1 4 1 5 2 3 2...
