WWW.RSIWW.COM
8 of 48
QTY
Fan Parts
H-7
1
Step 12
H-8
1
Step 12
QTY
Fan Parts
H-3
2
Step 12
H-1
2
Step 12
H-2
2 Step 12
H-4
2
Step 12
H-6
1
Step 12
H-9
1 Steps 12
Steps 12
Steps 12
Visit us at WWW.RSIWW.com/AssemblyQuestions for key assembly images and helpful tips.
Using T-Bolts
IMPORTANT: This greenhouse is assembled using a unique fastening system. The parts are attached to each other using
connectors fastened with a rectangular headed bolt referred to as a “T-bolt” and secured with a “2-SC cap”.
NOTE: If you are installing T-bolts in profiles that will
remain horizontal you may tighten them with your
fingers. In this manual, you will see “hand tighten”
which means securing in place with a screwdriver.
“Loosen T-bolt” means turning the T-bolt so it is
parallel in the bolt track and moves easily.
NOTE: You may use the verticle technique for attaching
T-bolts on the horizontal profiles if you desire.
In this manual you will prepare only the profiles required for each section. This includes installing T-bolts in the
locations needed for the entire assembly. The T-bolts with connectors and S-2C bolts secure the profiles in place.
Try installing a few T-bolts to determine how
tightly you will need to turn them so they remain
locked in place even if the profiles are knocked
around during installation.
Try installing a few T-bolt Assembly’s to determine
how loose the nut needs to be to ensure the head of
the T-bolt clears the profile edges and turns to lock
properly in the profile track.
List of Parts (continued)
H-10 10’
H-11 8’
H-5
4
Step 12
On vertical profiles you will place a nut on the T-bolt, hold the
bracket in place and push the T-bolt (with nut attached loosly)
through slot. The T-bolt will lock into place when nut is tightened.
On horizontal profiles the T-bolts may be slotted into the
profile from the end, slid into position, then then locked
in place by using a screw driver.
On horizontal profiles the T-bolts may be slotted into
the profile from the end, slid into position, then then
locked in place by using included T-5 screwdriver.
For vertical profiles place a nut on the T-bolt (
T-bolt
Assembly
), hold the bracket in place and push the
T-bolt assembly through slot.
The T-bolt will lock into place when nut is tightened.