Page 4 of 7
Windward Bay
Bedroom
Assembly Instructions
Made in Viet Nam
email: [email protected]
FURNITURE
Riverside
ASSEMBLY STEPS :
1. Remove both drawers from the Storage Footboard. Refer to the steps above.
2. Place the Footboard Panel (F-A) face down on a clean and soft surface.
3. Attach the Footboard Bun feet (F-B) to the bottom of the Footboard, using the Flat Washers
(F-J), Spring Washers (F-I) and Bolts (F-G). Tighten with the Allen Wrench (F-K).
4. Attach the Drawer Box Support Legs (F-D) using the Flat Washers (F-J), Spring Washers
(F-I) and Bolts (F-H). Tighten with the Allen Wrench (F-K).
To remove the drawer:
A. Pull the drawer fully open so the
black latch is visible in the inside
channel of the guides.
B. Release the latches by
simultaneously pushing one lever up
and the other down.
C. At the same time, pulling the
drawer forward until the slides
release.
