Rivers Edge Uppercut RE632, Руководство пользователя

Страница: 8 / 20

Check for parts online at
www.HuntRiversEdge.com
or call 800-450-EDGE (3343) M-F 8-5 8
Operator's Manual
Rivers Edge® Uppercut™
FIGURE 9b -
Rear fixed brace rotated into locked position
FIGURE 9a - Rear fixed brace in vertical position
FIGURE 8c -
Finger tighten locknut
FIGURE 8b -
Insert 1/4-20 x 2-3/4" bolt
FIGURE 8a -
Angle side rail outside of rear fixed brace
FIGURE 7 - Insert 1/4-20 x 2-3/4" bolt
SEAT ASSEMBLY
9. a. Position the factory assembled mesh seat (360018) upside down
on a sturdy, hard surface.
SEE FIGURE 6.
b. Insert (1) 1/4-20 x 2-3/4” bolt through the rear fixed brace (410122)
and side rail of mesh seat. Finger tighten locknut (rear fixed brace
locknuts will need to be removed in order to attach finished seat to
treestand later in assembly instructions). SEE FIGURE 7.
NOTE: The rear fixed brace is meant to be wider than the seat. The
TearTuff material is extremely durable and is meant to stretch.
SEE FIGURE 7.
c. Angle the other side rail so it is outside of the rear fixed brace
to align the bolt holes. SEE FIGURE 8a. Insert (1) 1/4-20 x 2-3/4"
bolt through the rear fixed brace and side rail (bolt will enter at an
angle). SEE FIGURE 8b. Finger tighten locknut to aid in further as-
sembly.
SEE FIGURE 8c.
d. Rotate the rear fixed brace towards the seat to lock the brace in
position.
SEE FIGURE 9a and 9b.
FIGURE 6 - Factory assembled mesh seat
Rear fixed brace is wider than seat.
bolt
Bolt will enter
at an angle.
locknut
locknut