Check for parts online at
www.HuntRiversEdge.com
or call 800-450-EDGE (3343) M-F 8-5
5
Operator's Manual
Rivers Edge® Uppercut™
INSPECTION AND MAINTENANCE SCHEDULE
FOR ALL RIVERS EDGE® PRODUCTS
• Inspect all webbing, rope, cord, and strap assemblies for wear
or damage.
• Inspect cables and cable ends for damage or kinking.
• Inspect all hardware and chain components for damage.
• Inspect for any structural damage to product. (Return to factory
for repair or discard product if any damage is found.)
• Inspect all nut and bolt assemblies to be certain none are loose.
• Inspect for any missing parts.
• Lubricate all pivot and slide together points with powder
graphite to prevent noise, wear, and rust.
• Inspect entire product for any rust, corrosion, cracks, freezing,
excessive heat, or rotting damage that may effect the safety
of your product. Discard any questionable product.
• Inspect entire product for any structural damage - pay close
attention to all weld locations. (Return to factory for repair or
discard product if any damage is found.)
• Using correct wrenches inspect all nut & bolt assembly
locations and snug up any that may be loose. Be careful not
to crush tubing when tightening!
• Inspect and check operation of all cables, cable ends, cord, rope,
webbing, and strap or chain assemblies. Replace with factory
new any item or assembly that shows signs of wear, damage,
kinking, or functions incorrectly.
• Inspect seat. Replace any seat with factory new that shows
signs of structural damage or wear.
• Inspect all hardware for wear or damage, also be sure you have
no missing parts.
• Never modify your stand in any way by making repairs,
replacing parts, or altering adding or attaching anything to it
except if explicitly authorized in writing by the manufacturer.
