Check for parts online at
www.HuntRiversEdge.com
or call 800-450-EDGE (3343) M-F 8-5
7
Operator's Manual
XL Ladder Stand
1
30
2
7. Slide the flared platform rails (8) into the seat side rails (9).
Insert two 5/16-18 x 1-3/4" bolts (23) and finger tighten with
two 5/16" nuts (32). SEE FIGURE 4
8. Attach the footrest (16) to the flared platform rails (8) and
front platform (6) using two 5/16 x 18 x 3-1/4" bolts (29),
six yellow washers (37) and two 5/16" nuts (32). The yellow
washers (37) should be on all four sides of the footrest (16)
and on the outside of the flared platform rails (8).
SEE FIGURE 4
9. Attach the top ladder rung (3) to the front of flared rails (8)
using two 5/16 x 18 x 2-1/4" bolts (28) and two 5/16" nuts
(32). Tighten all loose hardware at this time. SEE FIGURE 4
10. Slide shooting rail "A" (14) into shooting rail "B" (15) and
attach together using one 1/4-20 x 1-1/4" bolt (22) and one
1/4" nut (31). SEE FIGURE 5
11. Attach the assembled shooting rail (14 & 15) and seat platform
(11) to the armrests (17) using two 1/4-20 x 3-1/4" bolts (25),
four thick polymer washers (34), two yellow washers (36) and
two 1/4" nuts (31). Thick polymer washers (34) go between
seat platform and armrests and between armrests and
shooting rail. SEE FIGURE 5
12. Attach two bumper pads (38) to the seat side rails (9) so
that the seat will rest on them when in the down position.
SEE FIGURE 5
13. Attach three plastic spacers (35) to both armrests (17) using
two 1/4-20 x 2-3/4" bolts (26) and two 1/4" nuts (31).
SEE FIGURE 5
14. Insert flared platform rails (8) into the pockets of top ladder
section (1) and secure using two 5/16-18 x 1-3/4" bolts (23)
and two 5/16" nuts (32). SEE FIGURE 6
15. Attach the platform braces (5) to the top ladder section (1)
and to the rear platform (7) using four 5/16-18 x 1-3/4" bolts
(23) and 5/16" nuts (32). SEE FIGURE 6
16. a. Attach the two armrest covers (20) to the armrests (17) and
the shooting rail cover (19) to the shooting rail (14 & 15) by
wrapping around tubing and attaching Velcro together.
b. Attach the seat cushion (21) to the seat platform (11) by
wrapping straps around metal frame and securely fastening
all plastic buckles together. Pull straps tight so seat is not
loose.
17. Slide together the two ladder sections (2) and the top ladder
section (1) on the ground and secure together using four
spring lock pins (30). SEE FIGURE 7
32
23
8
1
5
23
23
32
7
31
26
11
14
15
25
22
31
17
34
34
31
35
9
38
36
9
29
8
37
23
32
16
3
28
37
6
FIGURE 4
FIGURE 5
FIGURE 6
FIGURE 7
