Check for parts online at www.HuntRiversEdge.com or call 800-345-6007 M-F 8-5
16
Operator's Manual
LOCKDOWN 2-MAN Ladder Stand
FIGURE 1
15. Before uprighting the stand to the tree, you must
attach the two long straps (56) to the assembled
treestand. Begin by feeding one end of each
strap through the three strap guides (7) under
the platform and at the top of the ladder on both
sides. SEE FIGURE 1 and DETAIL A.
Attach the looped ends of the straps together near
the center of the ladder with the carabiner on the
end of the tether rope (57). SEE FIGURE 1 and
DETAIL B.
Run the opposite end of each strap down to the
ladder ratchet (27) on either side of the ladder.
Run the strap down through the center slot in the
ratchet and “ratchet” just enough to loosely hold
the strap in place. They do not need to be tight.
This is only temporary to keep them out of the
way while you upright the stand to the tree. SEE
FIGURE 1 and DETAIL C.
Lastly, run the tether rope (57) down the length
of the ladder, wrap around the Silent LadderLocks
(35) that are near the ladder ratchets (27) and
loosely tie in place. SEE FIGURE 1 and DETAIL C.
You are now ready to upright the ladder. Follow
setup and use instructions on following pages.
Note: Model LD200 depicted varies from
manual model but the strap system is the
same.
DE
TAIL B
DE
TAIL C
56
7
7
7
57
27
35
Carabiner
DE
TAIL A
