KS3 WALL CLADDING
Step 2:
Back Wall:
Position the first Wall Sheet with
the LIP on the right hand side. Ensuring the LIP
is flush with the side of the corner Stud and the
top of the Wall Sheet is 45mm down from the
top plate, tack in place. Position the next Wall
Sheet with the LIP on the right hand side. Over-
lap as shown in
fig 1 pg 6
. Ensuring Wall Sheet
is 45mm down form the top plate, tack in place.
Repeat with remaining Wall Sheets.
Step 4:
Nailing Off:
Nail one 30mm Clout each side of the Rib (two per Pan) into the Top Plates and Bottom Plates. Nail
Wall Sheets to mid wall Nogs (one per pan). Nail each corner Wall Sheet to Studs using two 30mm Clouts evenly
spaced.
Step 3:
End Walls:
Position wall sheet with the LIP
flush with the side of the stud and the top of
the Wall Sheet is flush with the top of the Top
Plate, tack in place. If fitting a window, nail in
Window Studs and Nog now. Refer to Window
instructions.
8
Step 1:
Front Wall:
Start at the left hand side. Position the
Wall Sheet with the LIP on the left hand side. Ensur-
ing the LIP is flush with side of the Stud and the top of
the Top Plate, tack in place. Repeat with Wall Sheet
on the right hand side of doorway.
EDGE
TOP
