TF2089904-RG-00 English
Page 16 of 23
20170516 V.4
3. Assemble the Leg (2) to Welded Stand (1) by using
6pcs Bolt M6 x 12 (A) and 6pcs Nut M6 (B).
4. Assemble the Leg (2) to Stand Ring (3) by using 3pcs
Bolt M6 x 12 (A) and 3pcs Nut M6 (B). Install the
Small T-Support Leg (4) and (5) onto the Stand Ring
(3) with 3pcs Bolt M6 x 12 (A) and 3pcs Nut M6 (B).
5. Unscrew the pre-assembled nut from the threaded pin
of the Burner (9). Then insert the threaded pin at the
bottom of burner into the center hole of burner
supporting bar. Make sure the alignment pin on the
burner seat in the notch on the edge of burner
supporting bar. Align the holes on Heat Shield (7) with
threaded pin and alignment pin of Burner (9) and hole
on burner supporting bar, then fix the Heat Shield (7)
outside the burner supporting bar and tighten with hex
nut (on the threaded pin) onto the bolt of Burner (9).
6. Align Timer Control Box (8) to the timer box support
bar on Small T-Support Leg (5) and fix it with 2pcs
Bolt M6 x 12 (A) by going through the supporting bar
and then to the timer box.
B
1
2
3
A
1
2
2
2
3
B
5
4
A
7
Threaded Pin
9
Burner Supporting Bar
Timer Box Support Bar (5)
8
