RiverGrille GR2297801-RG-00, Инструкции по сборке и эксплуатации

Страница: 38 / 51

38 of 51 20190813-Ver.1.0
USING MATCH HOLDER TO LIGHT MAIN BURNER
1. Turn OFF all burner valves.
2. Make sure the lid is open.
3. Place a lit match on the match holder and
hold next to the main burner.
4. Turn the control knob to the “HI” position.
Burner should light immediately.
5. If ignition does NOT occur in 5 seconds,
turn the burner controls off, wait 5
minutes, and repeat the lighting
procedure.
6. Once the burner is lit, light adjacent
burners in sequence by pressing in and
rotating the control knob to the "HI"
position.
USING MATCH HOLDER TO LIGHT SIDE BURNER
1. Turn OFF all burner valves.
2. Make sure the lid is open.
3. Place a lit match on the match holder and hold
next to the side burner.
4. Push and turn side burner control knob slowly
to HI, burner should light immediately.
5. If ignition does NOT occur in 5 seconds, turn
the burner controls off, wait 5 minutes, and
repeat the lighting procedure.
DANGER
 Keep your face and hands as far away from the grill as possible when lighting it.
FLAME CHARACTERISTICS
This procedure outlines how to check for proper burner
flame characteristics. Burner flames should be blue and
stable with little yellow tips, with no excessive noise, or
lifting. If the flame is yellow, it indicates insufficient air. If the
flame is noisy and tends to lift away from the burner, it
indicates too much air. If any of these conditions exist, call
our customer service line. Visually check the burner flames
prior to each use. The flames should look like this picture. If
not, refer to the burner maintenance part of this manual.