manualshive.com logo in svg

RiverGrille GR2297801-RG-00, Инструкции по сборке и эксплуатации

Поделиться
Скачать
RiverGrille GR2297801-RG-00 Скачать руководство пользователя страница 36

                                                                             

  36  of 51 

                                                               

20190813-Ver.1.0

 

LIGHTING INSTRUCTIONS 

BEFORE LIGHTING 

 

WARNING 

  Inspect the gas supply hose prior to turning the gas 

ON

. 

  If there is evidence of cuts, wear, or abrasion, the hose must be replaced prior to use. 

  Do not use the grill if the odor of gas is present. 

  Only the pressure regulator and hose assembly supplied with the unit should be used. 

  Perform the “

LEAK TEST

” according to the instructions before operating the grill 

 

ALWAYS

 keep your face and body away from the burner while lighting. 

 
LIGHTING INSTRUCTIONS (Main Burner) 

1.  Read instructions before lighting. 
2.  Open the lid during lighting.   
3.  Make sure all control knobs are in the 

"

OFF

"

 position.   

 

4.  Turn ON gas valve from LP tank. 
5.  Light the 

IGNITION BURNER

 first. Push and turn burner control knob slowly to HI, burner 

should light immediately. 

 

6.  Once the IGNITION BURNER is lit, you may light the rest of burners. 

 

 

Содержание GR2297801-RG-00




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды