Riverbed RiOS, Руководство по началу работы

Страница: 48 / 146

48
2 - I
NSTALLING AND
D
EPLOYING
S
TEELHEAD
M
OBILE
2. Deploying Steelhead Mobile in Environments with Firewalls
If you need a solution for remote access users only, a location for the Mobile Controller might be in the DMZ
next to a VPN concentrator with firewalls on each side. Users who need access to the Mobile Controller can
connect to it from outside the DMZ zone. This scenario requires that the client-side network firewall have
port
7801 available. The server-side firewall must have ports 22 , 80 , 443 , 7800 and 7870 open.
If you are using application control, you need to allow rbtdebug.exe , rbtmon.exe , rbtsport.exe , and
shmobile.exe .
Figure 2-2. Steelhead Mobile Deployment in the DMZ
3. Installing on a Rack
‹ If your model has a bezel, remove it.
‹ Align the screw holes on the flanges with the screw holes on the rack.
‹ Insert and tighten the screws on each side of the appliance.
4. Connecting the Power
‹ If your model has a master power switch, make sure it is in the off position (on the rear panel).
‹ Plug the power cord or cords into the Mobile Controller and an AC outlet.
‹ If your model has a master power switch, press in the master power switch (ON).
‹ Press in the system power switch on the front of the Mobile Controller.
CAUTION: In all European electrical environments, you must ground the Green/Yellow tab on the power cord. If you
do not ground the Green/Yellow tab, it can cause electrical shock.