2D.27
1 NL
(STUBBY)
09. -
JEEP WRANGLER JL 20
18-
Aluminum/Steel
1684х401х336 mm
66
.
3
x
15
.
8
x1
3
.
2
inch
4
0 kg /
80
.
2
pound
www.rival4x4.com
*The Bumper is designed to complement the use and design of the specified vehicle under
conditions
specified by the vehicle manufacturer.
* While driving the vehicle at any speed, collision with any other vehicle, animal or object must
always be avoided.
* Following any collision with any other vehicle, animal or object, Bumper and the vehicle must be
inspected by a specialized or suitably qualified vehicle repairer for possible damage to the
components and assemblies in order to confirm suitability for further use of the vehicle.
* It is strongly recommended that you do not operate a vehicle with a damaged bumper or its
components. In the case of damage, please contact the nearest Rival authorised stock list.
* The operation of a vehicle where the bumper is not properly attached and fastened to the
vehicle, or where the bumper has been damaged, is extremely dangerous and must be avoided
at all cost.
* It is recommended that you carry out regular inspections of all the bumper elements such as all
bolts, wires, connectors.
SAFETY NOTICE
Part Number
:
Suited to vehicle
:
Material
:
Dimensioms
:
Weight
:
2D.27
1 NL FULL WIDTH)
23. -
(
JEEP WRANGLER JL 20
18-
Aluminum/Steel
1962х489х473 mm
77.2x19.2x18.6
inch
43
kg /
97
.
8
pound
Part Number
:
:
Suited to vehicle
:
Material
:
Dimensions
:
Weight
<
Page
2
of
1
2
>
Installation manual
2
D.
2709
.1-NL
, 2
D.272
3
.1-NL
REAR BUMPER
МОМЕНТ ЗАТЯЖКИ
* The Bumper must be mounted and affixed to the vehicle according to the installation manual
provided by an authorized Rival dealer or Motor dealer or by a special vehicle repairer or
fitment center.
* Estimated time for installation
: 2
hours.
* Personal safety during the installation process must be adhered to at all times and the use of
personal safety equipment is highly recommended.
* Do not install this bumper on vehicle models other than those allowed in this manual.
*
Check state and local highway safety laws regarding permitted bumper types and heights.
НЕОБХОДИМЫЙ ИНСТРУМЕНТ
* Basic tool kit
*
Torque wrench
*
f
Crosspoint and lat head screwdriver
* М6 - 9 Nm (6.6 lb/ft), * М10 - 30 Nm (22.1 b/ft), * М12 - 77 Nm (56.8 lb/ft), * М14 - 123 Nm (90.7 lb/ft).
INSTALLATION NOTICE
REQUIRED TOOLS
TORQUE SETTING
Date: April 29, 2020
