1 Notes on documentation
EN
12
Manual hydraulic punch
1
Notes on documentation
Please read these operation instructions closely before using your device for the
first time and keep them along with the enclosed Product Control Card for later
reference.
1.1
Associated documents
Assembly and operating instructions exist as paper documents for the unit types
described here and are enclosed with the equipment. We cannot accept any li-
ability for damage associated with failure to observe these instructions. Where
applicable, the instructions for any accessories used also apply.
1.2
Retention of documents
These instructions and all associated documents constitute an integral part of
the product. The operator is responsible for storage of the documents so they
are readily available when needed.
1.3
Symbols used
The following symbols are used in this documentation:
This symbol indicates an "action point" and shows that you should perform an
operation or work step.
2
Safety instructions
2.1
General safety instructions
Danger can occur when working with punch drivers due to improper handling
and/or poor maintenance, which may lead to the destruction of the device and
to severe physical injuries. Please observe all safety instructions of this operation
manual and contact our Service Team if you have any questions.
Danger! Always…
– …use the hand-operated hydraulic punch for its specified use.
– …check the punch, tools and tension bolt for damage and cracks before use.
– …keep hands and fingers away from the punching die and punch.
– …avoid contact with cutting edges.
– …follow the instructions in these operation instructions.
– …train new users in the use of this device.
– …store the hydraulic punch in a dry place, free of corrosive substances.
– …clean any oil residues off the rubber handle.
Warning!
Hazardous situation which may lead to death or serious inju-
ry if the instructions are not followed.
Caution!
Hazardous situation which may lead to (minor) injuries if the
instructions are not followed.
Note:
Important notes and the identification of situations that can result in
material damage.
EN
