Publication:
AMEN00395 2020-07-06
11
8. Place reversing edge housing (D) on top of curtain
bar and fasten evenly spaced every 12” -18” [305 -
457].
Route reversing edge cable/chain (E) in the groove
on the header guides and fasten with bolt (F) on
motor plate. Chain will curl to the inside of the guide
on right hand motor and opposite on left hand
motor,
Figure 10.5.
9. Position so the FlashFold stickers are in the upper
outside corners and the pinch point sticker is in the
middle at the top,
Figure 10.6.
10. Install non-drive header guide top cap with (2) 3/8”-
16 [10] hex head bolts,
Figure 10.8.
FLASHFOLD
™
MODEL FLSFLD
PUB. NO. FLSFLDG SEPTEMBER 2015
11
CHAPTER 3 - COVER INSTALLATION
Co
ver
and
Limit
Switc
h
Installa
tion
Figure 10.8
Figure 10.7
Figure 10.6
Figure 10.5
D
F
E
