Pub. No. 1190 — May 2014
15
RITE-HITE
®
VBR-500 DOK-LOK
®
Owner’s Manual
Sensing Switch Test Procedure
1. Set multimeter to “RX1” scale for “Continuity Test”.
2.
Attach multimeter leads to white and black wires of
mag. reed switch connector. You should have:
— no magnet present — no meter reading.
— magent present — a “Full Scale” meter reading.
white
black
FIGURE 9 - SENSING SWITCH TEST AND SWITCH/BARRIER POSITION CHART
SWITCH TESTING
