Ritchie Yellow Jacket ManTooth Series, Руководство пользователя

Страница: 4 / 16

Android phone or tablet running Android 4.0.3+
(Ice Cream Sandwich or later). To connect your
ManTooth PT Module to your phone or tablet
the two must
fir st be paired to one another.
The pairing of the module to your device is
done in your phone or tablet’s se
tti ngs.
**Note** you only need to pair your ManTooth
PT Module the
fi rst tim e you connect it to your
phone or tablet, however, if you force your
phone or tablet to “forget” your ManTooth PT
Module you will need to re-pair. **Note** your
ManTooth PT Module can be paired with
mul
ti ple devices at the same ti me. However, it
can only be connected and sending readings to
one phone or tablet at a
tim e.
To pair your ManTooth PT Module you fi rst
need to open the se tti ngs menu on the phone
or tablet you wish to pair to your ManTooth PT
Module. Next tap on “Bluetooth” to enter the
Bluetooth se
tti ngs. Be sure to turn your phone
or tablet’s Bluetooth radio on if it is not already
on.
Next turn your ManTooth PT Module on by
pressing and releasing the power bu
tt on on the
main module. If you have a 67002 dual unit the
main module is the one that says “ManTooth
PT Module” on the label not the one that says
“ManTooth PT Tether Module”. The module
will go through a brief start up sequence then
the light on your ManTooth PT Module should
start to blink blue. This means that your
ManTooth PT Module is searching for available
Bluetooth devices to connect with. Next, if you
are using an Android phone or tablet, tap on
“Scan” at the bo
tt om of the screen to scan for
available devices. Apple iOS devices should
automa
ti cally scan for available Bluetooth
devices.
Your ManTooth PT Module should then show
up as an available device to pair with on your
phone or tablet’s screen. This may take up to
30 seconds.
**Note** Your ManTooth PT Module’s name is
the same as the serial number and is printed on
the main module’s label just above the model
number (67001 or 67002).
Once your ManTooth PT Module shows up as
an available device tap on it’s name to pair it
with your phone. On Android systems a
“Bluetooth pairing request” alert may pop up
asking to con
fi rm the passkey tap on “OK” to
con ti nue.
Apple iOS Android
Apple iOS Android
4