Ritchie Yellow Jacket ManTooth Series, Руководство пользователя

Страница: 13 / 16

8: ManTooth thermistor temperature clamp
9: Temperature probe jacks
**Note** On 67002 tethered units numbers 1-
4, 5, and 9 are on the main unit only. The
tethered unit is only equipped with the
flai r
fitti ngs for measuring refrigerant pressure and
adjus ti ng charge.
Status Light
The mul ti -colored LED indicates the status of
your ManTooth PT Module.
Blinking Blue: The module is on and searching
for a Bluetooth connec
ti on. This will con ti nue
from when you turn on your ManTooth PT
Module un
til you connect to it within the
ManTooth RSA Pressure/Temperature app.
**Note** If your ManTooth PT Module looses
connec
ti on to your phone or tablet it will
automa ti cally revert back to this searching for a
connec ti on mode.
Solid Blue: The module is on and connected to
a phone or tablet via Bluetooth.
Solid Green: The module is connected to a
power source via the Micro USB port and is
charging. **Note** once the unit is fully
charged the green light will turn o
ff .
Blinking Red (Short): The module will blink
short
fla shes of red to indicate that it is sending
data to a connected device. This will occur
while the light is solid blue.
Blinking Red (Long): The module will flas h long
blinks of red when the ba tt ery level is below
10% of total life remaining.
Power Bu tt on
To turn your ManTooth PT Module on or o ff
push and release the power bu tt on once.
Device Name
Your ManTooth PT Module’s name is displayed
right on the label for easy reference. The name
takes the form of YJPT-XXXX-XXXX. The device
name serves as your ManTooth PT Module’s
name within the ManTooth RSA app, its serial
number, as well as its Bluetooth name that will
appear on your phone or tablet when pairing.
Temperature Probe Indicator
On the label of the ManTooth PT Module T1
and T2 are printed onto the label to indicate
which temperature port on the back of the
device corresponds to temperature port 1 (T1)
and temperature port 2 (T2).
Micro USB Charging Port
The ManTooth PT Module is designed to be
charged using any standard Micro USB charging
cord and corrisponding USB charger.
¼ Inch Flare Fi tti ng Pressure Transducer
Connec ti on
The flar e fitti ng on the front of the ManTooth
PT Module directs to the pressure transducer
with a working pressure range of 0-700 psia.
The
fitti ng is equipped with an “Adjust-a-Valve”
opener and sized to fi t most system access
ports for easy access to most AC and
refrigera
ti on units. The compact size of the
ManTooth PT Module and no hose connec tion
system reduces charge loss that can occur from
hoses used in charging through a standard test
and charge manifold. Adapters to connect the
ManTooth PT Module to other size access ports
are available from Yellow Jacket.
¼ Inch Flare Fi tti ng With Schrader Core
Pressure Transducer Connec ti on
The Schrader core fitti ng on the ManTooth PT
Module allows for recovering refrigerant,
adding charge, or removing charge all without
13