Rish Insu 5Dx
25
5
MANAGEMENT OF MEMORY DATA
5.1
SAVE MEASUREMENTS
1.
After performing a measurement, press
the
SAVE
key. The display shows a screen
similar to that reported here to the side,
which contains:
The number of the memory location in
which the measure will be saved
The last set value for parameter P
2.
Should you desire to change the value of parameter P, press the arrow keys to set the
desired value (from 1 to 255). This value helps remembering the location in which the
measurement considered has been performed.
3.
Confirm measure saving by pressing the
SAVE
key or press the
ESC/RECALL MEM
key to go
back to the previous screen without saving data in the memory
5.2
DELETE MEASUREMENTS
1.
Press the
ESC/RECALL MEM
key. The
display shows a screen similar to that
reported here to the side, which contains:
The number of the last memory
location used
The value of parameter P
2.
Press the
FUNC/ERASE MEM
key; the
instrument displays a screen similar to that
reported here to the side, which shows the
word “LAST”, to indicate that the last
measure saved will be deleted
3.
Press the arrow keys; the instrument
displays a screen similar to that reported
here to the side, which shows the word
“ALL”, to indicate that all the measures
saved will be deleted.
4.
Confirm deletion by pressing the
FUNC/ERASE MEM
key or press the
ESC/RECALL MEM
key
to go back to the previous screen without deleting data
