background image

6

RS/03-GT-016-2019

Date: 2021-02-01

HIT- Bifacial

module

RSM60-6-xxx BHDG

RSM72-6-xxx BHDG

RSM120-6-xxx BHDG

RSM132-6-xxx BHDG

RSM144-6-xxx BHDG

RSM156-6-xxx BHDG

The Solar PV modules described in this manual are terrestrial used only, cannot be used in space. The high
altitude influence to module operation should be considered when the modules are installed in high altitude
area.

3. Warning

Please read and understand all the safety cautions before the PV module installation, wiring, operation and
maintenance. When exposed to the sun light or other light sources directly, the PV modules will generate
the Direct Current, there will be the risk to cause people death when touching the electrical part like the
connectors/terminals no matter whether the modules are connected or not

4. Safety Cautions

In the installation and maintenance, all the Safety Cautions mentioned in this manuals should be followed,
in the meantime, all the requirements defined by local law, authority agency or government should be
followed.

Failed to follow this manual or the above rules/law will cause the fail of our Limited Warranty to the
modules.

Please get contact with local authority agency to confirm if the installation is legally allowed and meets
the installation inspection requirements before installing the PV system.

When designing the PV system, please be sure to consider about the voltage change under different
temperatures (please check the temperature coefficients of all PV modules, when the temperature
drops, the variable output voltage of the module will rise).

The shading on the module surface will affect the power generation much, the module should be
installed in the place where the module cannot be shadowed totally (such as the shadow from building,
chimney and tree etc.), and even the partially shading (such as the dirt, snow and aerial wire etc.)
should be avoided.

The detail parameter can be get from the official module datasheet from our website
(

www.risenenergy.com

)

Содержание RSM120-6- BMDG Series





































Отзывы: