Risen RSM120-6- BMDG Series, Руководство по установке и обслуживанию модуля

Страница: 15 / 36

15
RS/03-GT-016-2019 Date: 2021-02-01
Risen module should be installed in the following environmental conditions.
Table 7-1 operation condition
NO Environmental conditions Range
1
Recommended Working temperature -20°C to+50°C.
2
Extreme Working temperature -40°C to +85°C
3
Storage temperature -20°C to +50°C
4
Humidity
＜
85 RH%
Remarks: The working environment temperature is the monthly average maximum temperature and
minimum temperature of the installation site. The mechanical load bearing capacity of the solar PV
module is determined based on the installation method. The professional solar PV system installer
must be responsible for calculating the solar PV system machinery when designing the solar PV
system load bearing capacity.

If the module will be installed in a place of which the humidity is more than 85RH%, please get contact
with Risen After-service team (
afterservice@risenenergy.com ) for the properly installation method, or
check whether the module can be installed or not.

For most places, Risen solar PV modules should be installed where the sunlight can be maximally
acquired throughout the year. In the Northern hemisphere, the light-receiving surface of the module is
usually selected to face the South; in the Southern hemisphere, the light-receiving surface of the
module is usually selected to face the North.

When selecting the installation location, avoid areas with trees, buildings, or obstacles because these
objects will form shadows on solar PV modules, especially when the sun is at the lowest position on the
horizon in winter. The shadow will cause the loss of the output power of the solar photovoltaic system.
Although the bypass diode installed in the solar photovoltaic module can reduce this loss to some
extent, do not ignore the shadow factor.

Do not install solar PV modules near fire or flammable materials. Do not install solar PV modules where
there is water soaking, sprinkler or water spray.

Risen Anti-salt mist PV modules have passed the IEC61701 salt mist method 6 test. On land more than
1KM away from the coastline, Risen Anti-salt mist PV modules can be installed; Risen salt spray