6
Wall Guard Installation
The House Racer has wall guards to help prevent
the House Racer from flipping over when it makes
contact with other objects. Push them onto the
tops of the motors.
Radio System
Remove the screw from the battery
door. Insert 4 AA batteries in the
battery compartment in the back
of the transmitter.
Turn on the transmitter and connect the battery
to the Vusion. The quadcopter should beep once
when it is linked to the transmitter.
NOTE:
Always
turn the transmitter on first.
FLYING
1. Turn on the transmitter.
2. Plug in the quad.
3.
Immediately set the quad on a flat surface for 10 seconds.
Status LED
Rapid
Flash
– No signal is being received
from the transmitter.
Steady
– With a single beep from the
House Racer, the flight
controller is linked with the
transmitter.
Medium Flash
– With slow beeping from the House Racer, flight battery is
almost depleted, land immediately.
Slow
Flash
– With slow beeping from House Racer, lost signal from
controller (lost model beacon).
