【
【
【
【
3
】
】
】
】
__________________________________
3.3 Chipset Features Setup
ROM PCI/ISA BIOS (2A69JR09)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
Auto Configuration : Enabled
SDRAM CAS latency Time : 3
DRAM Speed Selection : 60ns
Auto Detect DIMM/PCI Clk : Enabled
MA Wait State : Slow
Spread Spectrum Modulated: Disabled
EDO RAS# To CAS# Delay : 3
CPU Clock Frequency : 66 MHz
EDO RAS# Precharge Time : 3
Current System Temp. : 22°C / 71°F
EDO DRAM Read Burst : x333
Current CHA_FAN Speed : 0 RPM
EDO DRAM Write Burst : x222
Current PWR_FAN Speed : 0 RPM
DRAM Data Integrity Mode : Non-ECC
Current CPU_FAN Speed : 0 RPM
CPU-To-PCI IDE Posting : Enabled
IN0(V) : 2.73 V IN1 (V) : 1.52 V
System BIOS Cacheable : Disabled
IN2(V) : 3.36 V IN3 (V) : 5.09 V
Video BIOS Cacheable : Disabled
IN4(V) : 11.98 V IN5 (V) : -11.91 V
Video RAM Cacheable : Disabled
IN6(V) :- 4.99 V
8 Bit I/O Recovery Time : 1
16 Bit I/O Recovery Time : 1
Memory Hole At 15M-16M : Disabled
Passive Release : Enabled
ESC : Quit
↑
↓
→
←
: Select Item
Delayed Transaction : Disabled
F1 : Help PU/PD/+/- : Modify
AGP Aperture Size (MB) : 64
F5 : Old Values (Shift) F2 : Color
SDRAM RAS-to-CAS Delay : Slow
F7 : Load Setup Defaults
SDRAM RAS Precharge Time : Slow
ADVANCED OPTIONS. The parameters in this screen are for system
designers, service personnel, and technically competent users only. Do not
reset these values unless you understand the consequences of your changes.
NOTE: This chapter describes all fields offered by Award Software in this
screen. Your system board designer may omit or modify some fields.
Auto Configuration
Auto Configuration selects predetermined optimal
vaules of chipset parameters. When Disabled, chipset
parameters revert to setup information stored in CMOS.
Many fields in this screen are not available when Auto
Configuration is Enabled.
The Choice: Enabled, Disabled.
_______________________________________________________________
3-6
