background image

2 - 

GR1-TM

 

GR1-TM

  English

dICHIARAZIONE dI CONFORMITà

dECLARATION OF CONFORMITY

Costruttore/

Manufacturer:

  

RISE s.r.l.

Via Maso, 27 36035 Marano Vicentino (VI) ITALY

Prodotto/

Product:

Tornelli per varchi pedonali:

Turnstiles for pedestrian access: 

GR1

Il sottoscritto Luigi Benincà, legale rappresentante della Ditta RISE s.rl., in qualità di distributore, dichiara 

che i prodotti sopra descritti sono conformi a quanto previsto dalle seguenti direttive comunitarie:

Direttiva Macchine 2006/42/EC del Consiglio del Parlamento Europeo riguardante i macchinari elettrici del 

17 Maggio 2006 e dei successivi emendamenti.

Direttiva di Bassa Tensione 2006/95/EC, PN-EN 13241-1:2012, PN-EN 60335-1:2012, PN-EN ISO 12100-

1:2005, PN-EN ISO 12100-2:2005, PN-EN 61000-6-2:2008, PN-EN 61000-6-3:2008/A1:2012, PN-EN 

60950:2002, PN-EN 61000-6-3:2002, PN-EN61000-6-2:2002.

The undersigned, Mr. Luigi Benincà, legal representative of the company RISE s.r.l., in the capacity of 

distributor, declares that the above mentioned products, complies the following EC Directives:

The device is a piece of machinery as understood by the Directive 2006/42/EC of the European Parliament 

and of the Council of 17 May 2006 on machinery, and its later amendments. The device is made pursuant 

to following directives and norms: Machinery Directive 2006/42/EC, Low Voltage Directive 2006/95/EC, 

PN-EN 13241-1:2012, PN-EN 60335-1:2012, PN-EN ISO 12100-1:2005, PN-EN ISO 12100-2:2005, PN-

EN 61000-6-2:2008, PN-EN 61000-6-3:2008/A1:2012, PN-EN 60950:2002, PN-EN 61000-6-3:2002, PN-

EN61000-6-2:2002.

Marano Vicentino, 05/09/2013    

            

 -----------------------------------------                                       

Legale rappresentante

Legal representative 

Содержание GR1





















Отзывы: