6
Press the
UP/DOWN
buttons and the display will show
use the
UP/DOWN
button to adjust the current to that
required.
Press the
SET/STOP
button to confirm the new charge/
discharge current and to return to the charge/discharge
display.
NOTE:
That it is possible to increase the charge rate above that
allowed in the manual parameter setup for Ni-MH cells. Great
caution should be taken if this is done as some of the lower
quality Ni-MH cells will not tolerate charge rates greater than
1C. (Charge rate equal to the capacity of the battery being
charged).
Choose either ‘On’ or ‘Off’ by pressing the
UP
or
DOWN
buttons.
If you choose ‘On’, the audible warning will sound every
time the buttons are pressed, if you choose ìOffî no audible
warning will be given.
Press
SET/STOP
to exit this function.
SOUND FUNCTION (CONT…)
To check details of the input voltage, output voltage,
charge/discharge time etc whilst charging, press the
UP
and
DOWN
buttons simultaneously. Then by pressing the
UP
or
DOWN
buttons it is possible to scroll through all the
displays step-by-step.
Characters used:
Va: – Average voltage
Vc: – Discharge cut-off voltage
Vi : – Input voltage
Vo: – Output voltage
Vp: – Peak voltage
Vs: – Discharge start voltage
DATA REFERENCE DURING CHARGING/DISCHARGING
Changes to the charge/discharge current are only possible
when manual charging/discharging.
When the battery is being charged the following screen will be
displayed.
ADJUSTMENTS POSSIBLE DURING CHARGING/DISCHARGING
ADJUSTMENTS POSSIBLE DURING CHARGING/DISCHARGING
Distributed by: Ripmax Plc. Ripmax Corner, Green Street, Enfield, EN3 7SJ.
Tel: 020 8282 7500 Fax: 020 8282 7501
Email: [email protected] Web Site: http://www.ripmax.com
Made in Korea
SuperNova 250S Inst.Update 17/11/03 10:46 am Page 6
