RIPEnergy Swing Pro 200VA Скачать руководство пользователя страница 6

Manual Swing pro.doc 

6/12 

 

Version 2 

 
 

11 Block 

Diagram 

 

 

 
 
 

12  Safety Information  

 

12.1 General 

information 

 
Read the manual carefully before installing or operating the inverter. If you do not understand or are 
uncertain about any operation or information please contact your dealer. Before installation you must 
be aware of local standards and rules applicable to use such equipment. For installation and use of 
the inverter pay attention to local applicable standards, all relevant safety guidelines and measures. 
These rules may be different to the information’s provided in this manual. 
 
High voltages up to 1200V inside the inverter! Never open the enclosure. High voltage may harm or 
even kill persons or animals. Never touch wires or blank connectors. Do not operate the inverter with 
damaged or substandard wiring. 
 
Check local standards for lightning protection of inverter systems.   
 
No other inverter output, AC-Generator or other AC-Source may be connected to the inverters AC-
Output. The inverter will be destroyed immediately! 
 
The enclosure may heat up to 80°C! Never obstruct louvers nor place other items on the inverters 
enclosure. If ventilation is not sufficient the unit may overheat and an automatic shut off may occur.  
 
Even if DC-Wiring is not longer connected to the batteries, inbuilt large capacitors may hold Dc-
Voltage for an extended period of time. The inverter may only be opened by skilled and authorized 
personnel. 
  
Modifications or breaking the warranty label without a written permission from RIPEnergy AG means 
that warranty is lost immediately! 
 
The inverter contains components which can produce arks and sparks. To prevent fire or explosion, 
do not install or operate in compartments containing batteries or flammable materials. Never use or 
operate the unit where there is danger of gas- or dust explosion. 
 
After automatic shut down of the inverter because of any failure the inverter may switch ON automatic 
again. The OFF period is depending on what causes the shut down and may vary from only seconds 
to several minutes.   
 
 

Содержание Swing Pro 200VA













Отзывы: