Manual Swing pro.doc
4/12
Version 2
4 General
Information
Thank you for choosing a product supplied by RIPEnergy AG. The product you have bought is manu-
factured to meet the highest quality standards. Our manufacturers have a very long experience in
manufacturing of high end electronic equipment.
5
Use of this manual
This user’s manual contains the information you need to install and operate this inverter correctly.
Check that you have the correct manual for your unit.
It is valid for the following units
:
Sinewave Inverter Swing pro 200-12-230 and 200-24-230 and 200-48-230
Sinewave Inverter Swing pro 350-12-230 and 350-24-230 and 350-48-230
Read the manual carefully before installing or operating the inverter. If you do not under-
stand or are uncertain about any operation or information, please contact your dealer. He
will be able to help you with an explanation or will demonstrate the operation.
The user must always have access to the user’s manual. The latest version of the manual
is provided and can be downloaded from the homepage of RIPEnergy AG.
These inverters must be only installed by qualified, authorized and trained personnel
familiar with the locally applicable standards and taking into consideration all relevant
safety guidelines and measures!
Never remove the type number plate. Important technical information required for service
or delivery of spare parts can be derived from the type number plate.
Modifications or breaking the warranty label without a written permission from RIPEnergy
AG means that warranty is lost immediately!
Always contact your dealer first if you have any problems.
6
Limitation of liability
RIPENERGY AG is not responsible or liable for any loss, damage or costs arising from operating
these inverters.
The products supplied by RIPEnergy AG are not for application’s in any medical equipment intended
for use as a component of any life support system. If products are used in such systems, a specific
written agreement between the manufacturer, RIPEnergy AG and the installer/manufacturer of the
system is needed. In addition, the manufacturer of the system must agree to indemnify RIPEnergy AG
from any claims arising from use of products supplied by RIPEnergy AG in the life support equipment.
