RIPCHARGE AP-3000 Pb Скачать руководство пользователя страница 2

 

Properties 
 

 

● Charger that can "listen" to the chemistry of the battery 
● Fast, smooth and battery friendly charging 
● Battery determines charging current by itself under 

supervision of  RIP algorithm microprocessor charging 
system 

● No warming up effect, which reduces battery life at overcharge 
● Regeneration cells when previously improperly charged 
● Longer battery life 
● Can increase battery capacity by up to 110% of rated 
● Safe against short circuit 
● Possible charging of starter battery 
● Connector for attachment of outside led indicator 
● Automatic detection of battery attachment (yellow led) 
● Precise indication of overcharging (green LED) 
● Working temperature range from 0º to 35ºC 
● Charging is independent from oscillations in the supply voltage 
● Temperature compensation charge reference voltage 
● Up to 8 charging programs for different types of batteries 
● Pulsed or linear charging current 
● Simple signalling of green, red, yellow LED, acoustic buzzer and LCD screen 
● Settings by using the rotary knob 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

RIPCHARGE UK, 3 CUTTS CLOSE, BRINKWORTH, CHIPPENHAM, WILTSHIRE, ENGLAND, UK. 
+44 (0) 1666 510626 e-mail:[email protected] 

Содержание AP-3000 Pb













Отзывы: