Riotoro CR280 MINI, Руководство по установке

Страница: 9 / 12

Attach Cables
Connect the Front Panel Switches and LEDs
The CR280 front panel switches, LEDs, and USB ports have wire leads that need to be attached to
header pins the motherboard. Refer to your motherboard manual to locate the proper motherboard
header pins and attach the cable connectors listed below.
Note: The LED leads are marked positive (+) or negative (–) and must be connected to the
corresponding pins on the motherboard. The orientation of the switch connectors does not matter.
Front Panel Cable Connector
Power switch
Reset switch
Power LED
(+) and (-)
Hard Disk Drive LED
(+) and (-)
HD Audio
(mic and headphone)
USB 3.0 ports
(1 cable for 2 ports)
Cooling Fans Connector
Fans (2)