Riotoro CR280 MINI, Руководство по установке

Страница: 7 / 12

Install Hard Drives and SSDs
The CR280 has one 3.5” drive bays and two 2.5” drive bays. These bays are located in the compartment
under the motherboard.
To install a 3.5” hard drive
The 3.5” hard drive will be held in place by two pins on the side of the case and by pins a retaining bracket.
1. Remove the thumbscrew and retaining bracket. Take note of the pin locations under the lip of
the case.
2. With the circuit board facing up, align the holes on the side od the drive with the case pins.
Then carefully slide the drive into position.
3. Align the retaining bracket pins with the holes on the other side of the drive. Slide the bracket
back in place and tighten the thumbscrew.