Rioned MULTI JET, Руководство пользователя

Страница: 29 / 61

01/18 29
a Press button 4 or (Throttle close).
b Press button 6 or (HP pump off).
Treat the high-pressure hose carefully:
• Always clean it after use.
• Ensure that no sharp objects are near the hose.
• Ensure that no traffic crosses the hose.
• If the hose has to be repaired, use only the special repair couplings.
Attention!
Ensure that the spraying nozzle does not leave the drain! Water
under high-pressure may cause severe injuries!
5.7 Cleaning a wall, terrace or floor.
Caution!
Before using a spray gun, you must always set the pressure below
the maximum (±the half of the maximum pressure). You must do
this before you start the machine. If the machine is running, the
pressure can be increased by turning the control wheel to his
working pressure. Never exceed the maximum pressure that is
marked on the manometer when using the spray gun.
1. Screw the spray gun including in the delivery onto the high-pressure
hose. Fasten it by using the two spanners provided.
2. COMPLETELY unroll the high-pressure hose ( see chapter 7.4 "Hydrau-
lic reel control" page.: 39 ).
3. Attach the spay lance gun. Secure the quick coupling tightly.
4. Open the HP valve.