Rion VT-06, Инструкция по эксплуатации, Страница: 6 / 48

iv
Precautions
VT-05
•
The unit is designed for making measurements using cup A containing
about 460 mL of sample fl uid. If another container is used, the viscosity
resistance working on the rotor will be different, leading to deviations in
the measurement result.
•
The viscosity scale readings for the various rotor types overlap in part.
For example, the following viscosity ranges can be measured with the
following both rotors:
15 to 33 mPa•s: No. 4 or No. 5 rotor
50 to 150 mPa•s: No. 5 or No. 3 rotor
However, depending on the properties of the sample fl uid and on mechanical
calibration results, the obtained measurement values may be different when
changing rotors. To facilitate the correct evaluation of data, you should
therefore note the rotor number along with the measurement results.