Rion VT-06, Инструкция по эксплуатации, Страница: 38 / 48

24
Applied part
Rotor extension (only for VT-06)
The supplied foldable rotor extension consists of three 30 cm rods
joined by rings. The combined length is 90 cm. When wishing to
use the extension at a length of 30 cm or 60 cm, open the connector
rings with a pair of pliers, remove the desired number of elements,
and rejoin the extension rods. Be sure to close the rings fully again,
to prevent the extension from getting detached during use.
Attach the end with the male thread to the viscotester and the
end with the female thread to the rotor.
Note that both are left-hand (reverse) screw threads, so you must turn the
parts counterclockwise to screw them in.
When measuring a fl uid with high viscosity, the joint will look as shown in
the illustration, but this does not affect the measurement.
The rotor extension rods are made of stainless steel.