Rion SA-A1WD, Инструкция по эксплуатации

Страница: 63 / 80

63
When the device is connected to a computer via a USB cable, it will be rec-
ognized as a removable disk. This allows you to transfer measurement data
to the computer without removing an SD card.
MEMO
- The device will not be recognized if it is connected to a computer during measure-
ment. Try it after exiting the measurement application.
1. Power on this device.
2. Connect the USB cable plug (A-MiniB) to the USB port on
the device.
To computer
USB
USB cable A-miniB
3. Connect the plug at the other end to the USB port on a
computer.
Important
- Insert the USB cable plug with the projection portion faced up straight to
this device. If you insert the USB plug in a wrong direction, the USB port on
this device may be damaged.
Connecting to Computer