Rion SA-A1WD, Инструкция по эксплуатации

Страница: 19 / 80

19
SA-A1WD is a wireless dock used to connect to the multi function measur-
ing system "RIONOTE" via wireless or wired LAN.
Various measurements available
Since a distant place can be measured using LAN, the utilization range
is widened. For example, it can be installed in a factory line using LAN.
Also, using wireless LAN transmits measurement data by radio wave
and eliminates the need of cables, resulting in simpler measurement. For
example, when you measure noise or vibration of a distant place, install
"SA-A1WD" in the measured place and install "RIONOTE" in an arbitrary
place. Then you need to just make a wireless connection between this
device and RIONOTE to perform measurement at the same time without
arranging a cable.
Multi-channel data transmission enabled
Since measurement can be performed by up to four amplifier units,
multi-channel data transmission becomes available.
Safely used for outdoor/long time measurement
This device conforms to the waterproof grade IP54 to offer safe use in
outdoor measurements and reduce unexpected troubles caused by a
sudden rain.
Also, this device employs AA batteries as power supply and power-saving
design to enable a long time operation. To be environmentally-friendly,
a nickel hydride rechargeable battery can be used to reduce battery dis-
posal. An external power supply can also be connected to extend mea-
surement time.
SA-A1WD Overview