4
HARD WAX HAIR REMOVAL
The area to be treated must be clean, dry and free of make-up
and grease, e.g. moisturisers, lotions, etc. It is a good idea to
wash the area prior to treating as this will temporarily remove
the body’s natural oils and help the wax adhere to the hairs.
As a general guide 1 tablet will be enough for 2 underarm
treatments.
PATCH TEST
Always do a patch test on the inside of your forearm or on a
small area of your skin for possible skin reaction. Wait 24 hours.
If irritation occurs do not use this product.
STEP 1
Place 1 tablet inside wax heater pan and
heat on highest setting (II) for 20 minutes.
Stir every 10 minutes until the wax takes on a
thick honey-like consistency.
STEP 2
Switch to lowest setting (I) to maintain an
ideal temperature for treatment.
Stir occasionally.
0
1
0
2
STEP 3
Using a spatula, apply a thick and even coat
of wax in the same direction of hair growth.
Apply one layer in small, even strips no wider
than 1 inch.
Allow wax to cool on skin until it is hard, but
still pliable.
STEP 4
Holding skin taut, flick up the corner of the
wax with your finger so that you have an area
to grip. In one quick motion pull the wax
off in the opposite direction of hair growth.
Do NOT pull away from the skin.
STEP 5
Immediately apply firm pressure to the area
with the palm of your hand or a cold compress
to soothe the area.
Move onto next patch and repeat steps 3–5
until area is completely hair free.
Apply firm pressure to treated area with the palm of your hand
or a cold compress to soothe the area.
DO NOT re-apply wax to treated area within 24 hours.
3
5
3
4
6
