Frequently Asked Questions
Return to Pg.1
Page 12
•
Connect your Rio Receiver to a home stereo system using the red and white RCA OUT jacks provided.
This will allow you to integrate your Rio Receiver into your home entertainment system.
•
Use the spring clips, which are powered outputs, for bare wire bookshelf speakers. The Rio Receiver
outputs 10 watts per channel. It is recommended that you choose speakers that have an operating
range that include 10 W.
•
Use any powered set of speakers using the 1/8" LINE OUT jack provided on the back of your Rio
Receiver.
There is a 1/8” stereo jack labled LINE OUT on the back of my Rio
Receiver, what is this for?
This is a line output for powered speakers. You can connect powered computer speakers to the back of
your Rio Receiver. This may be especially useful if you are placing the device in a smaller room without
access to a stereo receiver or bare wire speakers.
Will the Rio Receiver interfere with my telephone service?
No. While the Rio Receiver uses standard telephone lines to communicate with the host computer, it
operates on a separate frequency from your telephone or modem. You can use your telephone line without
interference from your Rio Receiver. Subsequently both devices will function properly without interfering
with the other.
Why do some songs show multiple entries when I try to select my music
on the Rio Receiver?
This can be caused by several reasons.
•
The most common reason for this is if a song is present in multiple folders on the server computer and
more than one of these folders is selected when importing music. The track will show up multiple
times.
•
This can also be caused by having the same track present in both .wma and .mp3 format on the server
computer. This can be avoided by storing only one instance of each track, in any form, in folders that
are imported to your Rio Receiver.
I receive an error message on the Rio Receiver display, what does this
mean?
Error messages that appear on the display of the Rio Receiver typically indicate a communication problem
between the Audio Receiver Manager software on the server computer and the Rio Receiver.
1.) Shut down the Rio Receiver and restart the Audio Receiver Manager software on the server computer.
2.) Once the software has reloaded on the server computer, restart the Rio Receiver. The receiver should
redetect the server and this should remedy the error message.
Will the Rio Receiver work with any Home PNA network adapter?
Yes. The Rio Receiver is based on Home PNA specification 2.0. This ensures maximum compatibility with
Home PNA 1.0 and 2.0 network devices. Your Rio Receiver should work with existing Home PNA
network configurations.
