Rinnai RHFE-201FA, Руководство владельца по эксплуатации и установке

Страница: 9 / 40

9
Rinnai Corporation RHFE-201FA
Operating Information
Function Lock
This feature locks the buttons to
prevent unintended operation.
Press the Function Lock button to
activate and the lamp will glow.
Pressing and holding the Function
Lock button for two seconds will
disengage the function lock.
If the Function Lock is engaged while
the unit is operating, all buttons will be disabled
except for the ON/OFF button.
If the Function Lock is engaged while the unit is
off, then all buttons will be disabled.
Adjusting Air Flow Direction
The vertical louvers may be adjusted to move the
air flow more to the right or to the left.
Use a screw driver or similar object to bend each
louver to the desired position.
Do not bend repeatedly (no more than 5 times) or
else the louver will break.
The horizontal louver (which determines the
vertical air flow direction) is fixed and cannot be
adjusted.
CAUTION Do not adjust the air flow
louvers while warm air is
flowing.
Sensible Temperature Control
The sensible temperature control feature allows
comfortable heating which matches the
conditions in the room.
Based on the information collected by the room
temperature thermistor when the heating starts,
the heating capacity is automatically adjusted to
achieve a comfortable heating effect and to reach
the temperature setting quickly.
Adding Water to the Humidifier
Warm air is humidified when it passes over the
water in the tray.
Remove the bottom trim panel below the louvers
by pulling on both sides. Pull the tray out and fill
with water. Push the tray back in and attach the
bottom trim panel.
During operation a small amount of condensation
is produced in the flue system and drains into the
humidifier tray.
CAUTION
Do not remove the
bottom trim panel or the
humidifier tray while
warm air is flowing.
Function
Lock