Rinnai Australia
8
Operation Manual
SAFETY
DO NOT MODIFY THIS APPLIANCE.
Failure to comply with these instructions could result in a fire or explosion, which could cause
serious injury, death or property damage.
Improper installation, adjustments, service or maintenance can cause serious injury, death or
property damage. Such work must be performed by an authorised person.
a. The appliance must be installed in accordance with the local gas and electrical authority
regulations.
b. For information on gas consumption, refer to the data plate on the appliance.
c. This appliance must not be installed where curtains or other combustible materials could
come into contact with it. In some cases curtains may need restraining.
d. Heat emanating from the front of this appliance may over time affect the appearance of
some materials used for flooring such as carpet, vinyl, cork or timber. This effect may be
amplified if the air in the room contains cooking vapours or cigarette smoke. To avoid this
possibility, it is recommended that a mat be placed in front of the appliance, extending at
least 750 mm in front of it.
e. The appliance is not intended for use by young children or infirm persons without
supervision.
f.
Young children should be supervised to ensure they do not play with the appliance.
g. If the supply cord is damaged or requires replacing, it must be replaced by the
manufacturer or the manufacturer's agent or similarly qualified person in order to avoid a
hazard.
THIS APPLIANCE MUST BE INSTALLED, SERVICED
AND REPAIRED BY AN AUTHORISED PERSON.
The wire mesh guard supplied with this appliance must not be
permanently removed as it fulfils an operational safety function.
Additional dress guards including free standing types may be
used in conjunction with, but not replace, the dress guard
supplied with this appliance.
WARNING
IMPORTANT
100mm
1000mm
100mm
250mm
The above diagram shows the clearances required
around this heater whilst in operation .
WARNING
WARNING
WARNING
WARNING
