Rinnai Australia
25
Installation Manual
HEATER INSTALLATION
3.
SECURING THE ENGINE
4.
CONNECTING THE APPLIANCE TO THE GAS SUPPLY
5.
INSTALLING CERAMIC BURNER MEDIA
Once the heater is in position, secure in place with appropriate fixings through the 11 mounting points provided
.
240 VOLTS, RISK OF ELECTRICAL SHOCK!
ISOLATE THE ELECTRICITY SUPPLY BEFORE CONTINUING.
Securely connect the consumer piping / flexible gas connection
to the appliances gas inlet point
. Test all
connections for gas leaks.
Use a soapy solution to test all gas connections. If a leak is present bubbles will form at the leak
point. When finished remove any residue with a rag.
Prevent any soapy solution from coming in contact with the electrical components.
Removing Combustion Chamber Glass
Before the ceramic burner media can be installed the
combustion chamber glass panel needs to be removed
as follows:
1.
Remove the four retaining screws
that secure
the combustion chamber glass panel
to the
heater engine.
2.
Then Rotate and lift the combustion chamber glass
clear of the combustion chamber. Place both
glass and screws in a safe location until required.
H
H
WARNING
WARNING
G
I
I
G
G
I
CAUTION
J
K
K
J
K
J
