Rinnai Australia
12
Operation Manual
BASIC HEATER OPERATION
FLAME FUNCTION
The flame function is used to select a desired flame picture and overrides the automatic
mode. There are seven separate flame picture settings available.
1. While the heater is in operation press the Flame button
once to activate this
function. The heater will automatically default to the last used flame picture setting.
2. "Flame" and a series of seven short bars
(one bar for each of the seven flame
picture settings) will be displayed to show that the flame function is in operation.
3. Use the Up and Down buttons
to select the desired flame picture. The number of
bars illuminated correspond to the flame picture setting selected.
To return to automatic mode press the Flame button
a second time.
Should the room temperature reach 40°C whilst the flame function is
activated the heater will switch off automatically. This is a safety feature.
13
31
12
13
STANDBY
ON
Flame
Extra
Low
Lock
Timer 2
Timer 1
Overide
Time
Set
Temperature
Lock
Clock
AM
PM
Timer 1
Set
Set
ON OFF
ON OFF
Timer 2 Set
OverrideAuto Off
Time
Flame
20
21
14
15
16
17
19
18
11
13
12
Temperature
Lock
AM
PM
Timer 1 Set
ON OFF
ON OFF
Timer 2 Set
OverrideAuto Off
Time
Flame
31
NOTE
