Rinnai RH-C1059-PBR, Инструкция по эксплуатации и монтажу

Страница: 9 / 24

7
Warning:
Before carrying out any cleaning or maintenance activities, ensure that the
appliance is disconnected from the main power supply.
Components inside the appliance may have sharp edges. Wear protective gloves.
Cleaning Agents
To ensure that the different surfaces are not damaged by using the wrong cleaning product,
follow the instructions in the table. Do not use any of the following:
 Harsh or abrasive cleaning agents, e.g. scouring powder or liquid scouring cleaner

Cleaning products with a high alcohol content

Hard scouring pads or cleaning sponges

Pressure washers or steam cleaners
 Cleaning products that dissolve limescale
 Aggressive all-purpose cleaning products
Note: Use a new soft sponge or cloth. Do wash thoroughly before each use. Never use a wire
sponge or brush as it may leave scratches or other marks and follow all instructions and
warnings included with the cleaning products.
Surface Instruction
`Stainless Steel
Clean with warm soapy water using a soft damp sponge or damp cloth
Wipe off with a dry lint free cloth to avoid smearing or staining on the hood
Clean in the direction of the grains only
Painted Surface
Clean with warm soapy water using a soft damp sponge or damp cloth
Wipe off with a dry lint free cloth
Do not use any stainless steel cleaner
Aluminium and Plastic
Clean with warm soapy water using a soft damp sponge or soft damp cloth
Wipe off with a dry lint free cloth
Glass
Clean with a solution of warm water and a little washing up liquid using a soft
damp sponge or damp cloth
Wipe off with a dry lint free cloth
Do not use a scraper
Controls
Clean with warm soapy water using a soft damp sponge or soft damp cloth
Wipe off with a dry lint free cloth
Never clean the controls with a wet cloth as there is a risk of damage to the
electronics
Care and Maintenance