Rinnai RH-C1059-PBR, Инструкция по эксплуатации и монтажу

Страница: 17 / 24

15

The max weight of the extractor hood is 18kgs.
Preparing the Installation
Ensure that there are no electrical wires, gas pipes or water pipes in the area where holes
are to be drilled.
Step 1
(Fig.6)
 Determine where the extractor hood
should be positioned and lightly mark
where the lower edge of the appliance
should be on the wall. Determine where
the middle should be based on the hob.

Place the template against the line
drawn on the wall and tape it in place.
Mark the area where the screws should
be inserted.
 Drill 8mm diameter holes to a depth of
40mm for fastening the appliance,
remove the template and press in the
wall plugs flush with the wall and mount
the screws (Do not tighten)
Attaching and Aligning the Extractor Hood
Step 2 (Fig.7, Fig.7.1, Fig.7.2)
 Mount the appliance onto the wall and
do ensure that it is properly engaged
with the mounting screws 3 & 4 (Fig.7)
 If there is a need to realign the appliance,
adjust the screws on the top of the motor
housing (Fig.7.1)
Fig.6
Fig.7
Fig.7.1