Commissioning
15
TESTING RCD
(For RCD model only)
Test the RCD by pressing the TEST
Button. The
Rinnai
and sign light will
turn OFF.
Press the RESET Button to switch ON
the unit again. This shows the RCD
should be in good condition.
Note!
If nothing happen when these button are
pressed, do not use the heater, and
contact your agent immediately.
Never attempt to repair the unit by yourself.
Fit the shower fittings. Once the riser rail
is fitted, the shower is ready for normal
use.
Turn ON the Pump Speed Control Knob
at the bottom left of the heater to test run
the pump. If the Shower is not hot
enough, adjust the speed knob slower to
reduce speed in order to get the
desired temperature.
(For Pump Model
Only )
Commissioning
17
RESET
TEST
