Rinnai RDT-90-RM-S, Руководство по эксплуатации

Страница: 35 / 52

34
2
Press and select the SELF-CLEAN course.
Lights (green)
Short beep
• To cancel SELF-CLEAN operation, press or
SELF-CLEAN cannot be stopped even by pressing
.
Information
4 When the buzzer sounds, the drum will stop.
3
Press .
After about 5 to 10 seconds
• If the or switch is pressed during operation,
the drum stops. If the equipment is left in this state for
approximately two minutes, drying operation is stopped,
and cool operation is started.
• When is pressed while the drum is stopped, after a
cooling operation of two minutes maximum, the operation/
combustion lamp will light up red and SELF-CLEAN
operation will resume.
Information
When SELF-CLEAN course ends, the buzzer sounds (three continuous beeps).
Before opening the front door, make sure that the operation/combustion lamp is off
and the SOFTEN&COOL lamp is blinking or on (green).
• Note that the lint filter and the area around the clothes removal port is hot immediately after operation ends.
Caution
• Cool operation begins after one minute if clothes are not taken out. Also, to lower the temperature inside the drum after removing clothes, close the front
door and resume cool operation after approximately two minutes. Operation automatically stops when cool operation ends.
• If SELF-CLEAN course is continued immediately after cooling operation, SELF-CLEAN begins immediately after cooling operation of two minutes
maximum.
• For details on how to stop cool operation, see pages 29.
Information
(3 beeps)
ESTIMATE TIME
MINUTES
Lights (green)
After about 5 to 10 seconds
Lights (red)
Short beep