Rinnai RDT-90-RM-S Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 52

Rinnai RDT-90-RM-S Скачать руководство пользователя страница 19

18

Checking Ignition and Forgetting to Turn Pilot Light Out

• Check ignition during use, and check that the pilot light is out after use.

• Before going out or going to bed, check to see if you have not forgotten to turn the pilot light

out.

• After use, be sure to check that the pilot light is out. Before you go out or plan not to use the

equipment for a long time, be sure to close the gas cock. (In the case of gas cocks without a
knob, remove the connector from the gas cock.)

Drying Cautions

• Clothes must be sufficiently spun-dried in a washing machine

before they are dried in this equipment.

Insufficient spin-drying may increase the drying time, or cause

abnormal equipment malfunction or a short circuit.

• If chlorine-based bleaching agents have been used in washing the

clothes, thoroughly rinse before drying. Chlorine remaining in the
clothes may cause the equipment to malfunction.

• Do not put wet dripping clothes in the equipment. Doing so might

cause electric shock.

• Do not open the front door or put in extra clothes midway during

drying. This may cause uneven drying.

«
...
17
18
19
20
21
...
»

Содержание RDT-90-RM-S





















































Отзывы:

Нет отзывов