7. Daily inspection and maintenance
Reminder
1. Prior to inspection and maintenance, confirm gas is turned off and stove has cooled
down.
2. During inspection and maintenance, if abnormalities are found, please contact our
service center immediately.
3.
Inspection item
Are gas pipe and stove connector fitted properly at the red line? Is piping
burned-out, corroded, or aged?
Are there flammable materials placed around
(oil, paper, cloth,
etc.)?
built in hob
wood,
Are burner head and pan support placed correctly?
Is there oil buildup in gap between burner head and pan support?
Is tip of thermocouple covered in oil?
Is tip of electrode covered in foreign matter?
Item
Description
Top plate, main body,
pan support, suction
shade dirty
Wipe clean with neutral detergent, then wipe with dry
cloth.
Burner head
maintenance
If fire vent is blocked by oil residue or flames are
abnormal, scrub burner head with copper brush and rinse
with water. Thenwipe dry to prevent water from flowing
back into piping.
Electrode
If residue on electrode is causing abnormal ignition, wipe
clean with dry cloth.
Auto extinguish
safety device
Do not brush with hard brushes. If water overspills, wipe
clean immediately, otherwise auto extinguish safety
device may not function properly.
Burner head seriously
blocked or damaged
Replace immediately, along with other damaged spare
parts.
Plastic parts or
coated surfaces
Cleaning with strong detergents or stain removers will
causelettering and coating to fade.
Daily inspection
Cleaning and maintenance
1
2
3
4
5
6
1
2
3
4
5
6
For inspection items not listed below, especially ser vices that include
safety device and gas piping, please contact our ser vice center.